Maretron MBB100 1.2 Firmware Revision , 1.3 MBB100 Features , 1.4 Quick Install

MBB100 User’s Manual

Of course you get the same flexibility using Maretron’s N2KView® software from the MBB100 as you

would running the software on a PC, which includes the ability to configure as many screens as you

want with exactly the information you want to see. Plus you get free upgrades to the software as

improvements and new features are added.

The Maretron MBB100 is designed to operate within the harsh demands of the marine environment.

However, no piece of marine electronic equipment can function properly unless installed, configured,

and maintained in the correct manner. Please read carefully and follow these instructions for

installation, configuration, and usage of the Maretron MBB100 in order to ensure optimal

performance.

1.2 Firmware Revision

This manual corresponds to the MBB100 running N2KView® Version 3.2.

1.3 MBB100 Features

The Maretron MBB100 has the following features.

• Full version of N2KView® software preinstalled (requires N2KView® licenses, purchased

separately)

• Wired Ethernet interface

• Supports user-supplied VGA monitor

• Supports user-supplied touchscreen (ELO, 3M Microtouch, Hampshire TSharc, Penmount)

• Supports user-supplied mouse and keyboard

• Supports Bluetooth mice and keyboards with built-in Bluetooth adapter

• Operates on 9-36VDC

• 20W power consumption

• Solid State Disk Drive

• Fanless cooling system

1.4 Quick Install

Installing the Maretron MBB100 display involves the following four steps. Please refer to the individual

sections for additional details.

• Unpacking the Box (Section 2.1)

• Choosing a Mounting Location (Section 2.2)

• Mounting the MBB100 (Section 2.3)

• Connecting the MBB100 (Section 2.4)

• Configuring the MBB100 (Section 2.5)