Mark Levinson 433 owner manual Power Button, Standby Button, Mark Levinson

Note:

14

Mark Levinson

2. Power Button

Powers the Nº433 on and off when the power cord is connected to the ~ac mains connector and an electrical outlet. When the Nº433 is powered on, pressing and releasing the power button disconnects power from the ~ac mains connector and powers the Nº433 off.

When the Nº433 is powered off, pressing and releasing the power button connects power to the ~ac mains connector and powers the Nº433 on. If the power save mode switch is set to on, the Nº433 enters sleep mode. If the power save mode switch is set to off, the Nº433 enters standby. See page 18 for more information on the power save mode switch.

The Nº433 must be powered on with the power button to respond to remote trigger commands.

3. Standby Button

Places the Nº433 into standby or sleep mode and takes the Nº433 out of standby or sleep mode. When the Nº433 is powered on, pressing and releasing the standby button places the Nº433 into standby or takes the Nº433 out of standby, allowing it to remain warmed-up to deliver optimal performance at all times.

Pressing and holding the standby button places the Nº433 into sleep mode. When the Nº433 is in sleep mode, pressing and releasing the standby button takes the Nº433 out of sleep mode. If the power save mode switch is set to on, the Nº433 powers on into sleep mode. If the power save mode switch is set to off, the Nº433 enters standby.