Mark Levinson 433 owner manual Danger, 9. ~ac mains connector

Nº433 Power Amplifier

Note

Warning!

Danger!

9. ~ac mains connector

Provides power to the Nº433 through the supplied power cord when the supplied power cord is connected to the ~ac mains connector and the electrical outlet. One IEC-standard AC mains receptacle labeled ~ac mains is available.

Before operating the Nº433, make sure the ~ac mains connector label indicates the correct operating voltage for the current location.

The Nº433 has been safety-tested and designed for operation with a three-conductor power cord. Do not defeat the “third pin” or “earth ground” of the power cord.

The Nº433 includes internal fuses as a final stage of protection. The protection circuitry is designed so that only a catastrophic failure will cause the fuses to blow. If this occurs, disconnect the power cord from the Nº433 ~ac mains connector and the electrical outlet. Then, contact an authorized Mark Levinson dealer for assistance.

Do not attempt to replace the fuse. There are no user-serviceable parts within the Nº433.

19

Potentially dangerous voltages and current capabilities exist within the Nº433, even when power is disconnected from the ~ac mains connector. DO NOT attempt to open the amplifier’s cabinet. There are no user-serviceable parts inside the amplifier. Refer all servicing to an authorized Mark Levinson dealer.