other linked components, possibly voiding the manufacturer’s warranty and/or standard repair policies.
Link communication cables can be constructed using a six-conductor modular Cat. 5 cable with the appropriate plug crimped on each end.
•Use a six-conductor cable (six-pin RJ-11 plug to eight-pin RJ-45 plug) when connecting the Nº433 to a Nº320S or Nº326S pream- plifier. (Pins seven and eight are not used on the eight-pin RJ-45 plug.)
•Use a six-conductor cable (six-pin RJ-11 plug to six-pin RJ-11 plug) when connecting the Nº433 to other Mark Levinson preamplifiers, including the Nº380, Nº380S and Nº32 Reference.
•Use a six-conductor cable (six-pin RJ-11 plug to eight-pin RJ-45 plug) when connecting the Nº433 to other Mark Levinson power amplifiers. (Pins seven and eight are not used on the eight-pin RJ-45 plug.)
BEFORE making Link connections, refer to the appropriate documen-
tation for Link or | communication port specifications for other | |
Mark Levinson components. | 21 |
| | |
When linking components with constructed Link communication cables, twist the cable 180° as shown in the illustration below for a straight-through (pin 1-to-pin 1) connection.
