Mark Levinson N26 manual Unpacking and placement, Precaution

Unpacking

Placement

Ventilation

PRECAUTION

Unpacking and placement

Unpack your Nº26 Preamplifier and PLS-226 Power Supply, and keep all packing materials for future transport. Remove all accessories from the cartons.

Carefully inspect the product for damage and flaws. If you find any, see your Mark Levinson dealer immediately.

Place the Nº26 as close as possible to the source equipment, thus keeping interconnect cabling as short as possible. It may be placed on a shelf or in a cabinet where it's convenient to operate.

A one-meter DC cable is provided to connect the PLS-226 to the Nº26. This allows you to place the PLS-226 so that it won't induce hum in the Nº26 and other sensitive components. If you're placing the Nº26 and PLS-226 adjacent to each other, place the PLS-226 to the right of the Nº26 (viewed from the front). You should also place associated equipment so that it doesn't induce hum in the Nº26 and other sensitive components.

Be sure to allow 3 to 4 inches of clearance above both the Nº26 and the PLS-226, to allow heat dissipation through air circulation.

Drawings are included in this manual to facilitate special installations and custom cabinetry (see "Dimensions").

For your protection, review "Important safety instructions" before you install your Nº26.

5