Mark Levinson N26 manual Voltage selection, PLS-226 bottom-panellabel

PLS-226 bottom-panel label

Voltage selection

The PLS-226 is factory-set (internally) for 100V, 120V, 200V, 220V, or 240V AC mains operation @ 50 or 60Hz. Make sure that the label on the bottom of the PLS-226 indicates the correct AC operating voltage for your location.

PLS-226 POWER SUPPLY

	DC OUTPUTS		AC INPUT
	WARNING: BEFORE ATTEMPTING TO
	OPERATE THIS DEVICE, REFER TO
	OWNER'S MANUAL FOR PROPER
	OPERATING INSTRUCTIONS AND SAFETY
Voltage	PRECAUTIONS. HAZARDOUS VOLTAGE
	AVAILABLE INSIDE; DISCONNECT AC~
indication	MAINS CABLE BEFORE REMOVING COVER.
		OPERATING VOLTAGE:
	90 – 110VAC~		210 – 240VAC~
	105 – 125VAC~		230 – 250VAC~
	180 – 220VAC~		~50 – 60HZ
		100 – 120VAC~
	MAINS	2A SLO–BLO 250VAC 3AB
	FUSES:	200 – 240VAC~
		1A SLO–BLO 250VAC 3AB

SERIAL NO.

DESIGNED AND MANUFACTURED IN U.S.A. BY

MADRIGAL AUDIO LABORATORIES INC.

If the voltage indicated is incorrect, see your Mark Levinson dealer.

If you wish to change the AC operating voltage of the Nº26/PLS-226, see your Mark Levinson dealer.

The Nº26/PLS-226 can be powered by a normal 15-ampere AC mains line. If other devices are also powered from the same AC line, their additional power consumption must be taken into account.

6