Mark Of Fitness XM-4419 owner manual Step

Assembly

NOTE: Hand tighten bolts and locknut until machine is fully assembled.

STEP 1

Attach the U-Shaped Front Base (2) to the front part of the Main Frame (1), and secure with three M10 washers (39), three M10X15 Allen Bolts (31).

Insert the Rear Base (3) into the rear part of the Main Frame (1) with two M10X15 Allen Bolts (31) and two M10 Washers (39).

Push four Spacers (23) into the Main Frame (1) as illustrated.

	23
		23
	41 23	1
33		23
	31
31 39	39		31
	31
			39
		39
		31
	2		3

STEP 2

Pull the Pop Pin (20) as far as it will go and slide Sliding Block (9) onto Incline Adjustment Tube (10). Push two Spacers (23) into the Sliding Block

(9).

Push two Spacers (23) into the Incline Adjustment Tube (10).Then attach Incline Adjustment Tube (10) to the bracket on

the Main Frame (1). Secure with one M10X75 Allen Bolt (33) and one M10 Lock Nut (41).

5

		1
	41
33	9	20
	23	23
		23
	23
	10