Marquis 9002MWD manual Install the Handset Battery, Removing the Handset Battery and Battery Cover

Models: 9002MWD

1 38
Download 38 pages 58.21 Kb
Page 20
Image 20

Install the Handset Battery

To install the handset battery;

1.Open the battery cover as shown,

2.Insert the battery pack. Match the polarity marks from the battery to the case (+ to +).

3.When properly installed, the battery will slide into position. DO NOT FORCE THE BATTERY. Be sure the contacts are cen- tered and the battery tab is placed into the tab slot. Note: if the battery does not seem to fit, turn the battery on the oppo- site side and re-insert.

4.Replace the battery cover by inserting the open end of the cover into the handset and pressing the back into place.

Battery Cover

Removal

2.Grip Here

3.Press Down Center

4.Slide Downward

1.Insert small screw- driver and lift upward to release cover

Removing the Handset Battery and Battery Cover

1.Insert a small screwdriver into bottom slot. Lift the cover by lifting the screw- driver. Do not lift the cover more that 1/2”.

2.Grip the handset tightly on the sides.

3.Depress the cover where the top portion of the battery cover (middle of the hand- set base) meets the handset. This will re- lease the battery cover lock.

4.Slide the cover downward and remove.

Battery Placement Tab Must Be

Placed Into Housing Slot

￿ ￿

￿ ￿

 

￿ ￿￿ ￿ ￿ ￿

DO NOT LIFT MORE THAN 1/2” UPWARD

20

Page 20
Image 20
Marquis 9002MWD manual Install the Handset Battery, Removing the Handset Battery and Battery Cover