get into it!
Use TEMP+- pad to set water temperature.
Spa cover helps maintain a constant water temperature.
starting your spa
6.Turn the power on.
7.Your spa is now in “pump priming” mode and a “Pr” message displays in the LCD window of the control panel. While in this mode the spa appears idle, which lasts approximately four to five minutes if not exited manually. To exit manually, press the TEMP+- pad.
8.At this time the spa should have water flowing from the jets. If the pump has not primed and the water is not flowing from the jets after two minutes TURN OFF POWER TO THE SPA and vent air from the pumps by slightly opening the pump unions. After turning the power on again, the spa initiates a new priming mode. Repeat steps above.
9.The system requires approximately two minutes of water flow to determine the water tempera- ture. After two minutes of water flow, the tem- perature is displayed as actual water tempera- ture. After you have manually exited the priming mode (or allowed the spa to automatically exit) the LCD window momentarily displays 102°F (39°C) and then the display switches to - - °F.
10.The factory default setting for water tempera- ture is 102°F (39°C). Use the TEMP+- pad on the control panel to set the water temperature to the desired level. (See SPA CONTROL OPERA- TION, Temperature Display And Adjustment.) Your spa heats at the rate of approximately one degree per hour for 120V systems, and five degrees per hour for 240V systems.
SPA COVER
When the spa is not in use, the spa cover should be kept on the spa to retain the water’s heat and to keep out dirt, leaves, etc. Your heater maintains a constant water temperature between uses.
For your safety and convenience, the cover is equipped with adjustable straps, safety locks, and handles. Use the exterior handles to remove and replace your cover. We suggest that you use the safety locks to help keep out unintended users and prevent the cover from being blown off in windy conditions. Cover Companion™ and other cover lifts are also available to assist you in cover removal. See your Marquis Spas dealer for details.
16
