click OK.
You’ll see the block writing progress bar proceeding from left to right
and
you’ll see the DX2 screen graphics shuffling from right to left…
…
followed by an indicator test (all LEDs on)…
…
a short delay…
…
and then a
Selecting a particular preset
Note that each binary file will load a family of presets into your DX2. Choose the required preset as follows:
1)Press the blue Menu button, then the Back and Next buttons to find the Global Memory Sub Menu and press Enter.
2)Use the Back and Next buttons to find the Recall a Memory and press Enter.
3)Use the Back and Next buttons to find the Crossover only and press Enter.
4)Browse for the appropriate preset using the Back and Next buttons or the Frequency knob.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
