Martin Fireplaces 2518 user manual Command Table, Function To execute

a p p e n d i x c

COMMAND TABLE

Function	To execute:
Save scene	Press [Store]. Press scene no.
Save flash scene	Press [Store]. Press [Midi].
Execute flash scene	Press [Midi].
Set auto-trigger	Press [Auto]. Wait. Press [Auto].
Toggle music trigger	Press [Music].
Toggle show mode	Press-and-hold [Up] + [Down].
Set show mode banks	Press [Up] or [Down].
Set show mode loops	Press a scene button from 1 to 6.
Blackout	Press [Blackout].
Standby	Press-and-hold [Blackout].
Clear blackout or standby	Press [Blackout].
Save auto-start configuration	Press-and-hold channel master.
Clear auto-start configuration	Toggle tandem mode on/off.
	Put both controllers on standby.
Toggle tandem mode	Press [Blackout] on bottom controller.
	Press [Blackout] on top controller.
	Quickly press-and-hold top 3 channel buttons.
	Select scene.
Create MIDI-callable scene	Press-and-hold [Midi].
	Press [Store].
	Generate MIDI code.
	Press-and-hold [Midi].
Create MIDI trigger	Press [Auto].
	Generate MIDI code.
	Press-and-hold [Midi].
Delete MIDI function	Press [Music].
	Generate MIDI code.
	Put (top) controller in standby.
Lock/unlock memory	Press [Blackout].
	Quickly press-and-hold fourth + sixth channel buttons until
	“LO” (lock) or “OF” (off) is displayed.
	Put controller in standby.
Delete all scenes	Press [Blackout].
	Quickly press-and-hold [Store] + [Up]
	Put controller in standby.
Delete all MIDI functions	Press [Blackout].
	Quickly press-and-hold [Store] + [Down]

Table 7: Command summary

25