Connection
WARNING! Turn your amplifier off before making or breaking any signal connections!
These speakers are designed with
Helos 12: Assign the same color to the (+) and
(–)terminals on both the speaker and the amplifier. Make certain that all connections are tight (figure 1).
Helos 22 Stereo: Connect two sets of speaker cables from the left and right channels of your amplifier (figure 2).
Helos 22 Mono: Connect one sets of speaker |
|
cables to one set of binding posts on the Helos 22 |
|
and use matching cable to bridge the second set |
|
of binding posts (figure 3). | Figure 1. Connecting the Helos 12. |
Figure 2. Connecting the Helos 22 for stereo use. Figure 3. Helos 22 bridged for mono use.
Protect Your Investment
• | Use an amp that approximately matches the • | Tone controls and equalizers may increase |
| speaker’s specified power handling. | the likelihood of distortion, especially at high |
|
| volumes. Use these setting sparingly. |
•To avoid damage, turn down the volume if the speaker is distorting, sounds harsh, or the bass begins to break up.
4
