ASSEMBLY
2g | 2b | 1 |
WING NUT
STEP 14
*Note: Wing nut is packaged with temperature gauge.
Attach temperature gauge (2g) and temperature gauge base (2b) to grill lid (1) using wing nut.
Tip:
Make sure the temperature readings and Masterbuilt logo in the gauge are aligned cor- rectly before tightening down the wing nut.
FIGURE 2
F
STEP 15
Place bakelite spacer (F) on grill
27lid (1). Attach handle (27)
using washers (J) and screws (D) as shown.
|
|
| Make sure lid handle (27) is slop- |
|
|
| ing downward as shown in |
27 | J | 1 | FIGURE 2. |
|
|
| The bakelite spacers (F) should |
|
|
| be angled down and slightly |
|
|
| outward with the larger side of |
| D |
| the spacers going to grill lid and |
|
| the smaller side attached to the | |
|
|
| |
|
|
| handle. |
13
