GAS HOOK-UP’S AND WARNINGS
(LP) LIQUID PETROLEUM GAS
•LP gas is nontoxic, odorless and colorless when produced. For Your Safety, LP gas has been given an odor (similar to rotten cabbage) so that it can be smelled.
•LP gas is highly flammable and may ignite unexpectedly when mixed with air.
LP cylinder requirements:
•Use LP cylinder only with these required measurements:
•12”(30.5cm) (diameter) x 18” (45.7 cm) (tall) with 20 lb. (9 kg) capacity maximum.
•LP cylinders must be constructed and marked in accordance with specifications for LP cylinders of the U.S. Department of
Transportation (DOT) or the National Standard of Canada,
LP cylinder valve must have:
LP GAS WARNINGS:
•Always turn cylinder valve off when the barbecue is not in use.
•Always handle the tank valve with the utmost care.
•Never connect an unregulated LP gas cylinder to the barbecue
•Always keep the cylinder, in use, securely fastened in an upright position
•Never expose the cylinder to direct sunlight or excessive heat.
•Never insert any kind of object into the valve outlet as this may cause damage to the Backcheck. A damaged Backcheck can leak resulting in fires, explosions, property damage, sever injuries or death.
•Do not store an LP cylinder in enclosed spaces such as a carport, garage, porch, covered patio or other building. Make sure the storage area has a lot of ventilation.
•Do not store an LP cylinder in an area where children play.
L.P. CYLINDER REMOVAL, TRANSPORT AND STORAGE
•
•Type 1 outlet compatible with regulator or grill. The type 1 valve is easily recognized by the large external thread on the outside of the valve.
•Safety relief valve with direct connection to the vapour space of the cylinder.
•UL listed Overfill Protection Device (OPD). This OPD safety feature is identi- fied by a unique triangular hand wheel. Use only LP cylinders equipped with this type of valve.
•A device for vapor withdrawal.
OPD Hand Wheel |
Type 1 outlet with |
thread on outside |
Safety Relief Valve |
Strap and Cap |
Before disconnecting the LP cylinder:
1.Turn OFF all control knobs and the LP cylinder valve.
2.Turn coupling nut counterclockwise by hand only - do not use tools to disconnect. Remove LP Cylinder from inside cart.
3.Install safety cap onto LP cylinder valve. Always use cap supplied with tank valve.
• Failure to use safety cap as directed may result in serious personal injury and/or property damage.
WARNING
When transporting and storing the cylinder, make sure it is in an upright position and not on its side. Do not smoke around cylinder, especially when transporting in a vehicle.
•A collar to protect the LP tank shut off valve.
•A ring on the bottom of the LP tank to secure it to the support assembly.
•Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.
WARNING
Any attempt to connect a regulator to any connectors other than the mating TYPE
DO NOT connect to a propane cylinder exceeding 9.1 kg capacity or use a cylinder with any other type of cylinder valve connection device.
Before opening LP cylinder valve, check the coupling nut for tightness.
DANGER
•NEVER store a spare LP cylinder, empty or full, under or near the appliance.
•Never fill a cylinder beyond 80% full.
•An over filled or improperly stored cylinder is a hazard due to possible gas release from the safety relief valve. This could cause an intense fire or explosion with risk of property damage, serious injury or death.
•Do not store objects or materials inside the barbecue cart enclosure that would block the flow of combustion air to the underside of either the control panel or the burner box.
•If you see, smell or hear gas escaping, immediately get away from the LP cylinder/appliance and call your fire department.
L.P. CYLINDER FILLING
•Use only licensed and experienced dealers.
•Ensure that the dealer checks and tests the tank for leaks after filling
•LP dealer must purge new cylinder before filling.
•Dealer should NEVER fill LP cylinder more than 80% of LP cylinder volume. Volume of propane in cylinder will vary by temperature.
•Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice.
•To remove gas from LP cylinder, contact an LP dealer or call a local fire department for assistance.
WARNING
If the above instructions are not completely adhered to, it could cause a fire/explosion, resulting in death or serious Injury, or property damage.
CAUTION
A frosty regulator indicates gas overfill. Immediately close LP cylinder valve and call local LP gas dealer for assistance.
2 | 3 |
