Chapter 2
Getting Started
The
3 “AA” size batteries or a 6V AC adaptor (not included).
Battery Installation
1. Make sure the unit is turned off.
2. Open the battery cover at the back of the unit using a coin or straight blade screwdriver.
3. Insert 3 “AA” size batteries. (Note the correct polarity: +, - ).
4. Replace the cover.
AC Adaptor Connection
Please turn off the unit before plugging in the AC 
adaptor to prevent damage to the unit. Plug the 
adaptor into the adaptor jack (center
positive type) located on the left hand side of the
unit. Plug the adaptor into a wall outlet.
Caution
•Do not mix different types of batteries or old and new batteries together.
•Only use batteries of the same or equivalent type as recommended.
•Remove all batteries when replacing.
•Remove batteries if the unit is not going to be used for long periods of time.
•Do not dispose of batteries in fire.
•Do not recharge
•Rechargeable batteries are to be removed from the toy before being charged.
•Rechargeable batteries are only to be charged under adult supervision.
•Remove exhausted batteries from the toy.
•Do not
Caution
•The unit must not be connected to a power supply greater than 6V.
•Only use the recommended adaptor.
•The adaptor is not a toy.
•Do not
•Toys liable to be cleaned with liquid are to be disconnected from the power source before cleaning.
•Due to AC/DC adaptor connection this product is not suitable for children under 3 years to use without adult supervision.
