Low temperature burners - INDITHERM®
Burner designation
Burner type | Burner size | Burner gas connection | Discharge sleeve |
| Ignition | Flame supervision |
|
|
|
|
|
|
|
INDITHERM® | 300 | ISO | HTS |
| DI | UVC |
Burner size |
| Discharge sleeve |
|
| ||
100 |
| HTS: High temperature |
|
| ||
300 |
| STD: standard version, stainless steel |
|
| ||
550 |
|
|
|
|
|
|
700 |
| Ignition |
|
|
|
|
850 |
| DI: Direct Ignition (plugged pilot port) |
|
| ||
1100 |
| PL: Pilot burner |
|
|
|
|
1500 |
|
|
|
|
|
|
1800 |
| Flame supervision |
|
| ||
Burner gas connection | UVC: prepared for |
| ||||
FRC: prepared for flame rod mounting |
|
| ||||
ISO: ISO threated |
|
|
|
|
| |
NPT: NPT threaded |
|
|
|
|
|
1 - 2.3 - 9 E - m - 7/08
Fuels
INDITHERM® burners are designed to operate on natural gas. For propane and butane operation a standard INDITHERM® burner can not be used. Contact MAXON when the use of gases other than natural gas is inevitable.
Burner discharge sleeve
The burner discharge sleeve is available in different materials and geometries:
Standard version with circular stainless steel discharge sleeve and square burner mounting plate.
High temperature version with refractory block for installation in applications where high temperatures can be expected.
Process airA |
In following cases the use of high temperature version discharge sleeve is required:
Dimension A is larger than 50mm
Insufficient low temperature process air is available to cool the discharge sleeve
No process air is available ( typical in indirect fired applications)
Process air is entered downstream of the burner, being unable to flow over the burner discharge sleeve
w w w . m a x o n c o r p . c o m
combustion systems for industry
MAXON reserves the right to alter specifications and data without prior notice. © 2008 Copyright Maxon Corporation. All rights reserved.