7 . SETUP MODEM USING HYPERTERMINAL

This section forward is for advanced users who may wish to control integration of the MM- 5100 without using the Maxon Phone UI Software. This section should be read in conjunction with the MM-5100 AT Commands User Manual.

To change the baud rate, start HyperTerminal which is located under ‘Start> Programs>Accessories>Communications>HyperTerminal’

HyperTerminal starts

HyperTerminal asks you for a Connection Description so enter a name of your choosing for this connection.

MM-5100 Windows Setup Manual 090803 NZ

Page 15 of 44

4/09/2003