9.1.3.Fax Properties - when using Serial

5:Properties for MM 5100 Fax tab

5.1: For reliable transmission we recommend you select the Maximum Transmission speed as “9600bps” and the Minimum Transmission speed at “9600bps” or “Send at any rate”. Maximum Transmission can be set at “14400bps” but if faxing proves unreliable, set back to “9600”.

5-2: Do NOT select this.

5-3: You must type the strings: “AT+CRM=0” in Field 1; “AT$QCVAD=2” in Field 2; “AT+FCLASS=2.0” in Flow control field;

“Use hardware flow control” MUST be ticked; ATZ in Reset field;

After typing that string, click the “OK” button.

If your WinFax® has the combo box in item number 5 as below:

1.Cellular (Analog/AMPS)

2.Cellular (PCS/GSM-Digital)

Either of these can be selected and work well.

MM-5100 Windows Setup Manual 090803 NZ

Page 31 of 44

4/09/2003