MM6854/64 Dual Band GSM Data Modem
Issue 1.0 ME 820047
03/00 Page 17
5.1.18 ATS7 – Wait time for carrierAfter dialling, this register sets the time that the modem must wait before hanging up if it fails to detect
the remote carrier. Time is in seconds.
Enter
ATS7=60
Response
Sets the wait for carrier time to 60 seconds (default).
Notes: None.
Result codes: None
5.1.19 ATS8 – Wait time before diallingSets the number of seconds to wait when the comma dial modifier is enc ountered in the dial string.
Enter
ATS8=2
Response
Sets the wait time before dialling to 2 seconds (default).
Notes: None.
Result codes: None
5.1.20 ATS10 – Wait time before disconnectionSet the number of tenths of seconds to wait before disconnecting after the m odem has indicated the
absence of the received line signal.
Enter
ATS10=15
Response
Sets the wait time before disconnection to 15 seconds (default).
Notes: None.
Result codes: None
5.1.21 ATS12 – Escape code guard timeDefines the maximum silence time, in fiftieths of a second, accepted bet ween two characters in an
escape sequence.
Enter
ATS12=10
Response
Sets the escape code guard time to 0.2 seconds (default).
Notes: None.
Result codes: None
5.1.22 ATV – Results code formatThis command is used to select short or long result codes.
Enter
ATV0
ATV1
Response
Sets short result codes.
Sets long result codes.
Notes: None.
Result codes:
OK
ERROR