MaxTech PCN2000 Series manual Section Two Installation, Unpacking Your Network Adapter, Model

Section Two - Installation

This section will provide step by step instructions on how to install your new PCMCIA network adapter. Installation of this network adapter is a two-step process consisting of actual hardware installation and PCMCIA device driver installation/configuration. This network adapter is designed to be software configurable using the included installation diskette.

2.1 Unpacking Your Network Adapter

Two types of network adapter cards are available. Before you proceed, determine the model you have purchased. The following table summa- rizes the contents and features for your PCMCIA Ethernet products:

Model

PCMCIA Card

RJ-45 Coupler BNC/RJ-45 Coupler LEDs

BNC T-connector Driver diskette User's Guide

PCN PCN

2000T 2000BT

xx

x

xx x

xx

xx

2.2 Hardware Installation

Installation of this adapter requires ac- cessing and configuring your PCMCIA Type II slot. All Maxtech PCMCIA products feature a built-in static electricity discharge mechanism, however, you should exercise all necessary precau-

2