Technical Information
Specifications |
|
|
W eight: | 5.4 ou nc es w ith alkaline batteries | |
Dimensions: | 1.4 inc hes deep x 2.1 inc hes wid e x 4.0 inc hes tall (b ody on ly) | |
| Flexible antenn a = 2.4 inch es tall. 0.3 inch es in d iameter | |
Batteries : | 2 x AA (IEC :LR 6), 1.5 V b atteries, alkaline recomm ended | |
| Read the Getting Started sec tion, Pag e 13, f or mor e inform ation | |
AC Adapter Jack: | 3 V DC unreg ulated, 0.3 A (3 00 m illiamp) or higher | |
| 4.5 V DC regulated, 0 .2 A (200 milliamp ) or high er, (recom men ded) | |
| Polarity = c enter positive, ou tside n egative | |
| Male plug specifications: 1.3mm ID, 3.4mm O D, 1cm long | |
Input / Output Ports: |
| |
Size |
| 3.5mm (1/8") mono miniphone |
Maximum Input Voltage | 2 50 V DC | |
PO RT 1 current handling | 0.5 A (½ Am p), c urren t limited | |
PO RT 2 current handling | 4.0 A for 0.00002 seconds (1/50000 second | |
|
| or 20 microseconds) |
|
| 0.25 A (1/4 Amp or 250 milliamp) continuous, |
|
| cu rrent lim ited |
PO RT 1 polarity | tip positive, n | |
PO RT 2 polarity | tip positive, reversible | |
PO RT 1 and Hot S hoe | 3.3 VD C, 0.001 A (1/1000 A mp or 1 m illiamp), | |
Voltage present | regulated | |
PO RT 1 and Hot S hoe | < 2.2 V | |
trigg ering thres hold |
| |
PO RT 1 and Hot S hoe | 0.0005 A (1/2000 Amp or 50 microamps) | |
holding current |
|
HOT S HOE NOT E #1: PO RT 1 and the hot s hoe are electric ally connec ted together . A device attached to POR T 1 will trigger when the TRAN SMIT unit is triggered by the hot shoe. T his is not con trollable by the L key. W hile the device may trigger in sync with the shutter, it will not be controlled by the MultiMAX. If the device is a high voltage flash unit then the MultiMAX does not provide voltage protection to the camera in this situation. For normal operation do not use POR T 1 to trigger a high voltage flash on a T RA NS MIT unit un less nothing is attach ed to the hot s hoe.
50