Maxtor 300 manual Regulatory Compliance Standards, Product EMI/EMS Qualifications

General Description

Versatility

•Quiet mode

•Power saving modes

•Downloadable firmware

•Cable select feature

•Ability to daisy-chain two drives on the interface

2.3REGULATORY COMPLIANCE STANDARDS

Maxtor Corporation’s disk drive products meet all domestic and international product safety regulatory compliance requirements. Maxtor’s disk drive products conform to the following specifically marked Product Safety Standards:

•Underwriters Laboratories (UL) Standard 1950. This certificate is a category certification pertaining to all 3.5-inch series drives models.

•Canadian Standards Association (CSA) Standard C.22.2 No. 1950. This certificate is a category certification pertaining to all 3.5-inch series drives models.

•TUV Rheinland Standard EN60 950. This certificate is a category certification pertaining to all 3.5-inch series drives models.

•This product meets the EC Directive on Waste Electrical and Electronic Equipment (WEEE) and the EC Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS)

Product EMI/EMS Qualifications:

•CE Mark authorization is granted by TUV Rheinland in compliance with our qualifying under EN 55022:1994 and EN 50082-1:1997.

•C-Tick Mark is an Australian authorization marked noted on Maxtor’s disk drive products. The mark proves conformity to the regulatory compliance document AS/NZS 3548: 1995 and BS EN 55022: 1995.

•Maxtor’s disk drives are designed as a separate subassembly that conforms to the FCC Rules for Radiated and Conducted emissions, Part 15 Subpart J; Class B when installed in a given computer system.

•Approval from Taiwan BSMI. Number: 3892A638

Quickview 300 80/100/120/160/200/250/300GB PATA 2-3