Maxtor 4 CH user manual Appendix #5 Network Application, Video Web Server

APPENDIX #5 – NETWORK APPLICATION

Video Web Server Features

•Compatible with most of CCTV Products; empower any video output device watching and controlling on the Internet or LAN

•Auto Network Reconnection (ANR)

•Upgrade firmware & AP from FTP site via Video Web Server

•Watch dog function supported

•Support Dynamic IP address

•4 alarm inputs supported

•Duplex function, record and playback simultaneously at client site

•Auto e-mail warning system which will remind you if external alarm happened

•Intelligent non-stoppable recording function after ANR

•	Multi AP screens supported	Video Web Server
•	Unique video player

DVR Control

1 ) Connect the Sub-D plug of Video Web Server with our own brand DVR products.

1/4 CH DVR

2 ) Set the “Remote” function in the DVR products.

NOTE : Remote mode : RS-485, Baud rate : 2400, ID : same

as “I/O port setting” in the Video Web Server.

3 ) Set the “I/O Port Setting” in the system config of Video Web Server.

Port1 : DMR-4, Device ID : 20.

23