Maxtor 51536U3, 51024U2 PowerRequirements, PowerModeDefinitions, EPA Energy Star Compliance

PRODUCT SPECIFICATIONS

PowerRequirements

MODE	12V ± 10%	5V ± 5%	POWER
Spin-up (peak)	2500 mA	620 mA
Seek (avg)	800 mA	510 mA	12.9 W
Read/Write (avg)	350 mA	530 mA	6.8	W
Idle (avg)	350 mA	490 mA	6.6	W
Standby (avg)	15 mA	235 mA	1.4	W
Sleep (avg)	15 mA	170 mA	1.0	W

PowerModeDefinitions

Spin-up

The drive is spinning up following initial application of power and has not yet reached full speed.

Seek

A random access operation by the disk drive.

Read/Write

Data is being read from or written to the drive.

Idle

The drive is spinning, the actuator is parked and powered off and all other circuitry is powered on. The drive is capable of responding to read commands within 40 ms.

Standby

The spin motor is not spinning. The drive will leave this mode upon receipt of a command that requires disk access. The time-out value for this mode is programmable. The buffer is active to accept write data.

Sleep

This is the lowest power state – with the interface set to inactive. A software or hardware reset is required to return the drive to the Standby state.

EPA Energy Star Compliance

Maxtor Corporation supports the goals of the U.S. Environmental Protection Agency’s Energy Star program to reduce the electrical power consumption of computer equipment.

EnvironmentalLimits

PARAMETER	OPERATING		NON-OPERATING/STORAGE
Temperature	5° C to 55° C		low temperature (-40° C)
			high temperature (71° C) per MIL-STD-810E, method 501.3,
			climatic category; hot-induced conditions.
Thermal Gradient		25° C per hour (maximum)
Relative Humidity		5% to 95% (non-condensing)
Wet Bulb			30° C (maximum)
Altitude	-200 to 10,000 feet		-200 to 40,000 feet
Acoustic Noise - Idle Mode	1 and 2 disk models: 3.6 bel
(per ISO 7779, 10 microphone,	3 disk models: 3.7 bel
average sound power)	4 disk models: 3.8 bel

3 – 3