Maxtor 6800 manual Interface Commands, Service and Support, Glossary

DIAMONDMAX 6800 PRODUCT MANUAL

Device Control Register	6 - 5
Digital Input Register	6 - 5
Reset and Interrupt Handling	6 - 6

Section 7 — Interface Commands

Command Summary		7	- 1
Read Commands		7 - 2
Read	Sector(s)	7 - 2
Read	Verify Sector(s)	7 - 2
Read Sector Buffer		7 - 2
Read DMA		7 - 3
Read	Multiple	7	- 3
Set Multiple		7	- 3
Write Commands		7 - 4
Write	Sector(s)	7	- 4
Write Verify Sector(s)		7	- 4
Write Sector Buffer		7	- 4
Write DMA		7 - 5
Write	Multiple	7 - 5
Ultra DMA		7	- 5
Set Feature Commands		7	- 5
Set Features Mode		7	- 5
Power Mode Commands		7	- 7
Standby Immediate		7	- 7
Idle Immediate		7	- 7
Standby		7 - 7
Idle		7 - 7
Check Power Mode		7 - 7
Set Sleep Mode		7 - 7
Default Power-on Condition		7	- 7
Initialization Commands		7 - 9
Identify Drive		7	- 9
Initialize Drive Parameters		7	- 12
Seek, Format, and Diagnostic Commands		7	- 13
S.M.A.R.T. Command Set		7	- 14
Section 8 — Service and Support
Service Policy		8	- 1
No Quibble Service		8 - 1
Support		8	- 1
Glossary
Glossary		GL - 1

iv