KEY LOCK
For advanced security, users can “Lock” the buttons on your DVR.
Press “ENTER” + “MENU” at the same time to enable Key Lock.
Press “ENTER” + “MENU” at the same time and key in password (Default : 0000), then press “ENTER“ to disable Key Lock.
NOTE: To switch to different USER, press “ENTER” + “MENU” buttons to “KEY LOCK” and then enter the different user’s password to UNLOCK.
TROUBLESHOOTING
When malfunction occurs, it may be not serious and can be corrected easily. The table below describes some typical problems and their solutions. Please check them before calling your DVR dealer.
PROBLEM | SOLUTION |
No power | • Check power cord connections. |
|
|
| • Confirm that there is power at the outlet. |
|
|
Not working when press any | • Check if it is under Key Lock mode. |
button | • Press "MENU" & "ENTER" to exit Key Lock mode. |
No recorded video | • Check if the HDD is installed properly. |
Timer Record enable does not | • Check if the Record Enable is set to YES |
working |
|
No live video | • Check camera video cable and connections. |
|
|
| • Check monitor video cable and connections. |
|
|
| • Confirm that the camera has power. |
|
|
| • Check the setting of camera lens. |
|
|
| To switch the system, press “POWER” + “FF” to NTSC |
NTSC & PAL System switch | system and “POWER” + “REW” to PAL system. |
| (Refer to Page 7 "GETTING STARTED". ) |
|
|
43
