Maxtor SLD240 Alarm Recording, REC Quality Best Audio OFF ALM Type ALM Duration, PRE- Alarm OFF

4.2.3 Alarm Recording

Take the following steps to activate the programmed alarm recording. For ALM OPERATION, REC RATE, REC QUALITY, AUDIO , ALM TYPE, ALM DURATION, and PRE-ALARMsettings, please refer to Section 5.2 for more details.

(1)Press the Setup button to enter the MAIN MENU.

(2)Select ALARM and press the Enter button to enter the ALARM SETTING.

(3)Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If audio is required, set AUDIO to ON. If pre-alarm recording is required, set PRE-ALARM to ON.

(4)To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM OPERATION to OFF.

MAIN MENU

RECORD

ALARM CLOCK / TIMER COMMUNICATION DISK

SYSTEM

GOTO ALARM PAGE

ALARM SETTING

ALM OPERATION		: OFF
REC RATE		: 20F/S
REC QUALITY		: BEST
AUDIO	:OFF
ALM TYPE		: NO
ALM DURATION		: 0 SEC
PRE- ALARM		: OFF
MOTION SETTING

MAIN PAGE

ALARM REC ENABLE

(5)To activate the motion alarm recording, select MOTION SETTING and press the Enter button to enter the MOTION SETTINGPAGE. Set MOTION ENABLETO ON, and set the sensitivity level that will trigger motion alarm recording.(1 is most sensitive; 5 is least sensitive).

ALARM SETTING
ALM OPERATION		: OFF
REC RATE		: 20F/S
REC QUALITY		: BEST
AUDIO	: OFF
ALM TYPE		: NO	?
ALM DURATION		: 0 SEC
PRE- ALARM		: OFF
MOTION SETTING
MAIN PAGE
ALARM REC ENABLE

MOTION SETTING

MOTIONENABLE : ON

SENSITIVITY : 3

MAIN PAGE

SET MOTION DETECTION

19