4.3.2 Slow Forward/Reverse
There are 4 speeds available for a slow playback: 1/2, 1/4, 1/8, 1/16. While playing back recorded video at the recorded speed:
(1)Press the PAUSE button 
for the slow playback mode.
(2)Forward: Turn the Shuttle dial 
clockwise to view the recorded video in the forward direction at a speed slower than the recorded speed. Each subsequent turn of the shuttle to the right increases the forward rate, as 1/2, 1/4, 1/8, and 1/16.
(3)Reverse: Turn the Shuttle dial 
counterclockwise to view the recorded video in the reverse direction at a speed slower than the recorded speed. Each subsequent turn of the shuttle to the left increases the reverse rate, as
(4)Normal: Release the Shuttle dial 
and then press the PLAY button 
to return to the normal speed of playback.
*You can also operate by using “<” button 
and “>” button 
.
4.3.3Play Back Picture-by-Picture
While playing back recorded video at the recorded speed:
(1)Press the PAUSE button 
for the
(2)There are two ways, by PAUSE button or by JOG, available to play in the
mode, but the PAUSE button 
can only function in a forward direction; the other, JOG dial
, can act in both a forward and a backward direction, as well as
By PAUSE button 
:
Press the PAUSE button 
to display one frame/field of a picture at a time in the forward direction. (When playing back video recorded by a multiplexer, each
sequential press of the PAUSE button 
will display each camera in sequence.)
By JOG dial | : |
|
| |
|
|
| ||
Turn the JOG dial | clockwise to display one frame/field of a picture at a time in the | |||
forward direction. Turn the JOG dial | counterclockwise to display one frame/field of a | |||
picture at a time in the backward direction. |
| |||
(3)Press the PLAY button 
to return to the normal speed of playback.
4.3.4PlayBack Recorded Video from an HDD in the Mobile Rack
To play back a recorded video from HD 2, take the following steps:
(1)Press the Setup button 
to enter the setup menu.
(2)Select DISK and press the Enter button 
to enter the DISK SETTING page.
(3)Set the HD2 USAGEto REC and then exit the setup menu.
(4)Use the search function to access desired recorded video. For specific operation details please refer to Section 4.4 (Search Operations ).
22
