Maxtor SLD240 operation manual Rear View

2.2 Rear View

25	26	27	28	29	31
	FROM MUX
VIDEO	MAIN MONITOR
		AUDIO		RS-485
	IN		IN
			ETHERNET		RS-232
			10/100
OUT			OUT
TO	TO				ALARM I/O		DC12V
MUX'S VCR IN
	MONITOR
32	33	34			35	37	38 36

VIDEO IN Connector: This BNC connector is used to connect the video output from a camera or a MUX

(multiplexer) to the DVR.

FROM MUX MAIN MONITOR Connector : This BNC connector is used to connect the live video output from a MUXto the DVR.

AUDIO IN Connector : This connector is used to connect the audio output from a camera, a MUX, or other audio device to the DVR.

ETHERNET 10/100 Connector: This is one standard RJ-45 connector for 10/100 Mbps Ethernet networks.

RS-485Port: The RS-485 communication ports function as connectors when two or more units are connected in series to expand the storage capacity.

RS-232Port: The RS-232 communication port functions as a connector to an external control device. Please refer to for more details.

VIDEO OUT Connector: This connector provides the unit’s composite video signal to a MUX.

MONITOR Connector : This connector provides the unit’s composite video or a MUX’s live signal if connected to a display device.

AUDIO OUT: This provides the unit’s audio signal to a speaker.

ALARM I/O: This is a 9-PIN D -SUB connector including SWITCH OUT, GROUND, ALARM OUT, DISK

FULL, RECORD IN, ALARM R ES ET, and ALARM IN for connecting with external devices. Please refer to the next section (2.3) for details.

Plug Inlet: The inlet connects to an external power supply. Connect a 12 Vdc UL Listed Class 2 or ITE LPS Power Supply.

Wire Catch: The wire catch secures the power cord and keeps it in place (so that it does not droop or

hang loosely).

Ground Screw:Screw used to ground the chassis.

7