Important Safety Information
About Ground Wires
In the event of an electrical short circuit, a ground wire reduces the risk of electric shock by providing an escape wire for the electric current.
Standard accepted color coding for ground wires is green or green with a yellow stripe.
Grounding wires and wires colored like grounding wires are NOT to be used as current carrying conductors.
Grounding Instructions
For safety, washer must be grounded. All washer power supply cords are equipped with
WARNING
To avoid risk of personal injury or death due to electrical shock:
Save These Instructions
•Observe all local codes and ordinances.
•Disconnect electrical power to unit before servicing.
•Ground appliance properly.
•Check with a qualified electrician if you are not sure this appliance is properly grounded.
•DO NOT ground to gas line.
•DO NOT ground to cold water pipe if pipe is interrupted by plastic,
•DO NOT modify plug on power cord. If plug does not fit electri- cal outlet, have proper outlet installed by qualified electrician.
•DO NOT have a fuse in the neutral or ground circuit. A fuse in the neutral or ground circuit could result in an electrical shock.
•DO NOT use an extension cord with this appliance.
•DO NOT use an adapter plug with this appliance.
•DO NOT pinch power cord.
Washer Dimensions
(9336.6"cm) | cm) |
43.6"(110,7 | |
| H C |
26.9" (68,3 cm)
53.5"
(137,1 cm)
28" (71,1 cm)
2"
(5,1 cm)
Optional Kits
Kits are available at extra cost through your Maytag dealer or Maytag Customer Assistance at
Siphon Break Kit
For standpipe installation below 36" (91.44 cm), install part #562P3.
Longer Water Inlet Hoses
8’ (2.44 m) inlet hose, part #20617.
10’ (3.05 m) inlet hose, part #20618.
Drain Hose Extension
Order this kit in two parts: the coupler, part #406P3, and 1’ additional drain hose, part #20616.
Anchor Kit
To stop washer from moving on uneven surfaces, install part #155P3.
Adjustable leg Extension Kit
To level washer on extremely uneven surfaces, install part #566P3.
5
