Maytag 500 Oven Cooking, Control Panel, Using the Touchpads, Clock, Bc D G H I J

Oven Cooking

Control Panel

A BC D

E F G H I J

The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions. Control panel shown includes model specific features. (Styling may vary depending on model.)

A	BROIL	Use for broiling and top browning.
B	BAKE	Use for baking and roasting.
C	More (▲) or	Enters or changes time, oven
	Less (▼)	temperature. Sets HI or LO broil.
D	TIMER	Sets Timer.
E	COOK & HOLD	Bakes for a preset time, then holds food
		warm for 1 hour.
F	CLEAN (select	Use to set self-clean cycle.
	models)
G	DELAY	Programs the oven to start baking at
		a later time.
H	CLOCK	Use to set time-of-day clock.
I	KEEP WARM	Use to keep cooked food warm in oven.
J	CANCEL	Cancels all operations except Timer
		and Clock.

Using the Touchpads

•Press the desired pad.

•Press ▲ or ▼ to enter time or temperature.

•A beep will sound when any pad is touched.

•A double beep will sound if a programming error occurs.

Important: Four seconds after pressing the ▲ or ▼ pad, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the ▲ or ▼ pad, the function will be canceled and the display will return to the previous display.

Clock

The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format.

To change the clock to

24-hour format:

1.Press and hold the CANCEL and DELAY pads for three seconds.

2. Press ▲ or ▼ pad to select 12 or

24 hour.

3.Set the time of day following the directions below.

To set the Clock:

1. Press the CLOCK pad.

• Colon flashes in the display.

2. Press ▲ or ▼ pad to set the time of day.

• Colon continues flashing.

3. Press the CLOCK pad again or wait four seconds. The colon stops flashing.

When electrical power is supplied or after a power interruption, the last clock time before power was interrupted will flash.

To recall the time of day when another time function is showing, press the Clock pad.

Clock time cannot be changed when the oven has been programmed for Delay Cook, Delay Clean or Cook & Hold.

To cancel the Clock display:

If you do not want the time of day to display:

Press and hold the CANCEL and CLOCK pads for three seconds. The time of day will disappear from the display.

Cont.

14