Salt
(applies to dishwashers with water softeners)
Pour in salt
Before using a dishwasher with a water softening filter, you must fill the salt com- partment with salt. Use coarse salt or spe- cial salt for dishwashers.
It is best to fill with salt when you are about to do a wash, as the dishwasher needs to be rinsed out immediately after filling. Proceed as follows the first time:
1.First unscrew the cover as illustrated.
2.Place the funnel, which is supplied with the dishwasher, into the compartment’s filler hole. First pour in approximately 1 litre of water.
3.Then fill the compartment with max 1.5 kg salt.
4.Wipe away excess salt so that the cover can be properly screwed into place.
5.Run a Normal wash program so that any salt in the machine is rinsed away.
When the salt runs out, unscrew the cover and fill the compartment with salt. Water is only needed on the first occasion! Wipe clean and screw back in place. Run a Nor- mal wash program so that any salt is rinsed away.
Occasionally check to see if more salt is needed. A green indicator can be seen in the cover of the salt compartment.
Cover for the salt compartment
CAUTION!
Never pour dishwasher detergent into the salt compartment. The water softener will be ruined!
21
