Settings
Setting water hardness
If you have a dishwasher with a water softener, you may need to change the setting de- pending on the water’s hardness level. Phone your local Water Board to check the water hardness in your area. The dishwasher is set for low water hardness on delivery.
| L2 |
|
|
|
| L12 | L7 |
L1 |
| L4 |
|
|
| L11 | L8 |
L6 | L5 | L10 | L9 |
|
|
1.Switch off the dishwasher with the main switch.
2.Press the main switch while holding in the Start/Stop button.
3.Release both buttons and the L7 light will flash.
4.Select desired setting (see table below) by pressing repeatedly on the Program button.
Setting | ˚dH | ˚fH | |
|
|
| |
All | |||
extinguished | |||
|
| ||
L1 lit | |||
|
|
| |
L1, L2 lit | |||
|
|
| |
L1, L2, L3 | |||
lit | |||
|
| ||
|
|
| |
L1, L2, L3, L4 | |||
lit | |||
|
| ||
|
|
| |
L1, L2, L3, L4, | |||
L5, L11 lit |
|
| |
L1, L2, L3, L4, | 45 and | 80 and | |
L5, L6, L11, | up | up | |
L12 lit | |||
|
|
5.Confirm your selection by pressing the Start/Stop button.You now automatically leave the settings menu and the selected setting remains until you want to change it.
22