Maytag 6919559A warranty Lights/Display select models, Cycles, Options and Lights

Cycles, Options and Lights

Lights/Display (select models)

INDICATOR	DESCRIPTION
Time Remaining Display	Shows approximate minutes remaining in a cycle. The symbol “2H” will appear when
(select models)	cycle time is greater than 99 minutes. Cycle times shown in the numerical display
	(select models) will increase or decrease, based on each load’s soil level, water
	temperature and selected options.
Clean Light	Illuminates at the end of the cycle and remains lit until the door has been open for 30
	seconds continuously.
Drying Light	Illuminates during the entire dry period and goes out when the cycle is completed.
(select models)
Washing Light	Illuminates during all rinse and wash portions of the cycle.
(select models)
Heating Delay Light	Illuminates when cycle is being extended to heat the water.
(select models)
Sanitized Light	Illuminates at the end of the cycle when conditions have been met to achieve
(select models)	sanitization. The light will remain lit until the door has been open for 30 seconds
	continuously.

Notes

•When Sanitize is selected, cycles are monitored to assure sanitization. The Sanitized light will not activate if sanitization requirements are not met. This could happen if the cycle is interrupted, power failure occurs or incoming water temperature is below 120° F (49° F).

•The Clean and Sanitized indicator lights (select models) will not relight after a power failure until after the next cycle is run.

11