Instructions for Installation (cont’d)
Converting the Lower Element (cont’d)
1.Before beginning the conversion turn “OFF” electric power supply to the water heater.
4.Lift out the tab as shown to unclip the terminal cover from the thermostat. The terminal cover can now be removed from the thermostat.
Lift out tab to unclip terminal cover from thermostat.
WARNING
HAZARD OF ELECTRICAL SHOCK! Before removing any access panels or servicing the water heater, make sure the electrical supply to the water heater is turned “OFF”. FAILURE TO DO THIS COULD RESULT IN DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.
2.The convertible element is located behind the lower access panel of the water heater. Remove the two screws securing the access panel, and remove panel.
3.Remove the block of insulation and pad to expose the terminal cover.
5.Remove the screws from terminal 2 of the element, and move the looped end of the wire aside.
6.The buss bar is labeled 5500 W. Place the buss bar over ter- minals 2 and 3 with the 5500 W visible. Install the extra screw provided into terminal 3.
5500 W
14
