Coil Element
Surface
Lift-up Porcelain
Cook_op
To prevent the cooktop from
discoloring or staining:
•Clean cooktop after each use.
•Wipe acid or sugar spills as soon as thecooktophascooledasthesespills
Yourrange features an upswept porcelain cooktop that can be lifted up for conve-
nient accessto the area under the cooktop. may discolor or etch the porcelain.
To lift cooktop: When cool, grasp the front edge of the cooktop. Gently lift up
until the two support rods at the front of the cooktop snap into place,
Coil Elements
•When an element is turned on, it will cycle on and off to maintain the heat setting,
•Coil elements are
•Do not immerse in water,
To remove: When cool, raise element. Carefully pull out and away from recep-
tacle. _\\
_
To replace: Insert terminals on the ele- ment into receptacle. Guide the element
intoplace. Gentlypressdownontheouter edge ofthe element untilit sitslevel on the drip bowl.
Drip Bowls
The drip bowls, located under each sur face element, are designed to catct boilovers and must always be used. Ab
sence of these bowls during cooking ma_ damage wiring or other parts underneatt
the cooktop. Topreventtheriskofelectricshockorfire never line drip bowls with aluminum foil Dripbowls will discolor(blue/gold stains over time, if overheated. This discolora
affect cooking performance.
TO protect drip bowl finish: tion is permanent. However, it will no
• Avoid using high heat settings for |
long periods of time. |
• Do not use oversized cookware. |
Pans should not extend more than |
oversized pans, use the Canning |
_ | • ! | SUPPORT ROD |
c | ; | ]\ |
|
| V |
To lower cooktop: Hold the front edge of the cooktop and carefully push back on each support rod to release. Then gently lower the top into place. The support rods will slide into the range frame.
N
_ tERMINALS
Element (Model CE1).Contact your |
Maytag dealer for details or call |
• When home canningor cookingwith |
• Cleanfrequently. (Seecleaning sec- |
tion, page 8.) |
