Oven Cookin
Oven Control
Timer
Bake Broil Clock Timer
NOTE:The display will flashwhen the appliance is first connected to power or ifpower is interrupted. The display will stop flashing once
Cancel Pad
Press to cancel all operations except the clock and timer.
•and • Pads
Press and tap, or press and hold, to enter the desired time,temperature, or to select HI or LO broil.
Bake Pad
Use for baking or roasting.
1.Press Bake pad.
2.Press • or • pad to set the oven temperature.
Seepage 6 for additional information.
Broil Pad
Use for top browning and broiling. 1. Press Broil pad.
2.Press • or • pad for Hi or Lobroil,
See page 6 for additional information,
Setting the Clock
1.If the display is flashing, press the
Clock pad to stop the flashing, then press the Clock pad again,
•If the colonis not flashing, press the Clock pad.
•The clock time cannot be set if the control is programmed for a bake, broil or timing operation,
2.Set the correct time of day using the A and • pads. If the • or • pad is not pressed within 30 seconds, the pro- gram will cancel. Press the Clock pad and begin again,
Setting the T/mer
The timer canbe setfromoneminute (:01)
up to 11 hours and 50 minutes (11:50). Time will be displayed in minutes and
not in seconds. THE TIMER DOES NOT CONTROL THE OVEN.
1.Press the Timer pad.
•:00will light and the Timer indica- tor light will flash in the display.
2.Pressthe • or • pad until the desired time is displayed.
•The timer will begin as soon as the time is set.
•The flashing colon indicates that a timingoperationisinprogress. (The colon will not flash if the time of day or oven temperature is displayed.)
•The timer countdown will be
displayed unless another function is programmed after setting the
timer.
•A single beep signals the end of the operation. "END" will appear in the display. If the time of day or
oven temperature is displayed "END" will not appear.
•A short beep will sound every 30 seconds for ten minutes to remind
you that the operation has corn- pleted. "END" remains in the
display until Cancel pad is pressed.
If desired, press the Clock pad and the time of day will reap- pear in the display during a timing operation.
3.Press the Cancel pad and the time of day will reappear in the display.
To cancel the timer operation: Press and hold the Timer pad for several seconds.
Additional Information
•A beep will sound each time a flmc- tion pad is pressed. There is no beep for the • or • pad.
•If a fault code (example: F2) is dis- played and beeps sound, press the Cancel pad. If the fault code contin- ues, see page 10.