Maytag Refrigerator Triple Cool Climate Control, Cselect models, Initial Temperature Setting

TemperatureControls

Adjusting the Controls

•24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If so, adjust the control(s) as indicated in the Temperature Control Guide table below.

•Except when starting the refrigerator, do not change either control more than one number at a time.

•Allow 24 hours for temperatures to stabilize.

Temperature Control Guide
Refrigerator too warm	Set the refrigerator		control	to
	next higher number by
	pressing the		pad.
Refrigerator too cold	Set the refrigerator		control	to
	next lower number by
	pressing the		pad.
Freezer too warm	Set the freezer control to next
	higher number by pressing the
	pad.
Freezer too cold	Set the freezer control to next
	lower number by pressing the
	,;i:_iii:i;ii%!i!ili;Ji!!pad.
Turn refrigerator OFF	Press the freezer or
	refrigerator	pad until		a
	dash "-" appears in the
	display.

•The display will show the new setting for approximately three seconds, and then return to the actual temperature currently within that compartment.

•Do not change either control more than one degree at a time. Allow temperature to stabilize for 24 hours before making a new temperature adjustment.

Temperature Control Guide

Refrigerator too cold	Set the refrigerator control		to
	next higher number by
	pressing the ,\s+-_pad.
Refrigerator too warm	Set the refrigerator control		to
	next lower number by
	pressing the f-"\j pad.
Freezer too cold	Set the freezer control	to next
	higher number by pressing the
	\:_F_:pad.
Freezer too warm	Set the freezer control	to next
	lower number by pressing the
	_=_ pad.
Turn refrigerator OFF	Press the freezer _-_	pad
	until OFFappears in the
	display. Press either the

freezer or refrigerator _=.b pad to turn back on.

Speed Ice

Triple Cool Climate Control

Cselect models:}

The control is located at the top front of the fresh food compartment.

Control

(_ Freezer _ Refrigerator

Initial Temperature Setting

Temperatures are preset at the factory at 38o F (3o C) in the fresh food compartment and 0° F (-18o C) in the freezer compartment.

Adjusting the Control

24 hours after adding food, you may decide that one or both compartments should be colder or warmer. If so, adjust the control as indicated in the Temperature Control Guide below.

•The first touch of the _+_or _:_pads shows the current temperature setting.

11

When activated, Speed Ice reduces the freezer temperature to the optimum setting for 24 hours in order to produce more ice. Note: When the Speed Ice feature is in operation, the _:_and _-_b pads for the freezer control will not operate.

Reset Filter (select models)

When a water filter has been installed in the refrigerator, the yellow Order light will illuminate when 90 percent of the volume of water for which the filter is rated has passed through the filter OR 11 months have elapsed since the filter has been installed.

The red Replace light will illuminate when the rated volume of

water has passed through the filter OR 12 months have elapsed since the filter was installed. A new filter should be installed

immediately when the Replace light is illuminated.

After replacing the filter, press and hold the Reset Filter pad for three seconds. The Order and Replace lights will go off.

Vacation Mode

The Vacation Mode feature causes the freezer to defrost less frequently, conserving energy. The Vacation Mode indicator light