FreshFoodFemures
Dairy Center
The Dairy Center provides convenient door storage for spreadable items such as butter and margarine. On select models, this compartment can be moved to several different locations to accommodate storage needs.
To Remove:
• Slide dairy center up and pull out.
To Install:
•Slide assembly in and down so that the hooks are firmly seated on the door liner.
To Remove Dairy Door:
• Press in sides of dairy door and pull out.
To install Dairy Door:
To install:
•Place bucket in desired door liner retainer, push down until bucket stops.
Storage Drawers
Humidity-Controlled Crisper Drawers
The Crisper Drawers provide a higher humidity environment for fresh fruit and vegetable storage.
Controls
The crisper controls regulate the amount of humidity in the crisper drawee Slide control toward the Fruit setting for produce with outer skins. Slide control toward the Vegetables setting for leafy produce.
•Slide sides of dairy door inside dairy center until hinge points snap into place.
Adjustable Deep Tilt-Out Door Buckets
(select models)
The Adjustable Deep
easy access to food items stored in the door.
To Remove Bucket:
•Tilt bucket out.
•Pull straight out of the bracket. 1"o Install Bucket:
•Tilt the front of the bucket down slightly.
•Slide into bracket and tip upright.
To Move Bucket Frame to Another Location:
•Remove bucket.
•out.Liftbracket up and pull straight
Place the bracket in a new location.
Door Buckets
Door Buckets can be moved to meet
individual storage needs.
To Remove:
•Lift bucket up and pull straight out.
Automatic Humidity Control
Some crispers are equipped with an Automatic Humidity Control system, eliminating the need for manual humidity slide controls on the drawer. A
| i N_@i N@N | I |
This material controls the flow of moisture out of the crisper. If a food spill should occur on the air vent or
*Maytag Automatic Humidity Control system features a unique, patented material called Shape Memory Polymer (SMP) that when laminated to fabric, becomes DIAPLEX. DIAPLEX is
manufactured by Mitsubishi.
The ff_teHigent Texture
To Remove:
•Pull drawer out to full extension. Tilt up front of drawer and pull straight out.
To install:
•Insert drawer into frame rails and push back into place.
iNote
• For best results, keep the crispers tightly closed.
14
