![Manual background](/images/new-backgrounds/66265/6626543x1.webp)
Troubleshooting
Ice
PROBLEM | POSSIBLE CAUSES | WHAT TO DO |
Refrigerator is | Supply tubing was used to complete | The manufacturer recommends using copper tubing |
leaking water | water connection. | for installation. Plastic is less durable and can cause |
|
| leakage. The manufacturer is not responsible for |
|
| property damage due to improper installation or |
|
| water connection. |
| Improper water valve was installed. | Check water connection procedure. |
|
| 0.5 cm saddle valves cause low water pressure and |
|
| may clog the line over time. The manufacturer is not |
|
| responsible for property damage due to improper |
|
| installation or water connection. |
|
|
|
Ice forms in inlet | Water pressure is low. | Water pressure must be between 137 to 689 kpa to |
tube to ice maker |
| function properly. |
|
|
|
| Freezer temperature is too high. | Adjust freezer control (see page 8). Freezer is |
| recommended to be approximately | |
|
| |
|
|
|
21