![Manual background](/images/new-backgrounds/66265/6626513x1.webp)
Installation
4. Rotate the handle so that the handle is flat against the door.
5. Push the handle down against the upper door tab just enough to allow it to hang unsupported.
6. Align bottom of handle with lower door tab. Press upper handle end to door surface and firmly grasp lower end of handle. Gently slide handle upward until bottom of handle settles on door surface, then reverse direction, sliding downward to almost engaging tab with clip.
7. Grasp the handle firmly and slide down until it clicks. The audible click indicates fastening clips are securely interlocked.
To Remove:
1. Flex the handle away from the door
panel. Simultaneously place door handle removal card underneath the base of the lower handle. Insert the card to the line or until it stops.
2. Grasp the lower part of the handle firmly and lift to remove.
Front Mount Freezer Handle
Materials Needed
•Gloves to protect hands.
•Phillips screwdriver.
•Plastic handle removal card (or 0.1 cm thick plastic card). Retain the card.
Notes
•There is a slight curve to this style of freezer handle.
• For proper installation, be sure handle is oriented as shown.
To Install:
1.Align door handle clips slightly to the left of the tabs attached to the freezer door.
2.Rotate the handle so the left base is flat against the door.
Handle | Door |
Clip | Tab |
| Handle |
| Base |
3. Push the left handle base against the left door tab and slightly to the right, just enough to allow it to hang unsupported.
4.While firmly supporting the left handle base against the door, align the right base of the handle with the right tabs that are attached to the door.
5.Now, while firmly holding the handle at the left and right bases, gently slide the handle towards the right until the right base settles in. The handle should now be flat against the face of the freezer door at both the left and right bases.
6.With hands still firmly keeping the handle flat against the freezer door, you may have to reverse
directions momentarily to assure clip/tab |
|
engagement. Then firmly slide the handle to the |
|
right until it clicks. The audible "click" indicates |
|
that the fastening clips are securely interlocked. | 6 |
|