Fresh Food Features
The Crisper Top serves as the lower fresh food shelf.
To Remove the Crisper Top:
•Remove crisper drawers as indicated on page 11.
•Place hand under the frame to push up the glass. Lift glass out.
•Lift frame from refrigerator liner rails.
To Install:
• Repeat above instructions in reverse order.
Door Storage
Dairy Compartment
The Dairy Compartment provides convenient door storage for spreadable items such as butter
and margarine. This compartment can be moved to different locations to accommodate storage needs. To use the dairy compartment, raise the cover.
To Remove:
• Raise the cover, pull upward and tilt out.
To Install:
• Reverse above procedure.
Door Buckets
Door Buckets can be moved to meet storage needs.
To Remove:
• Slide bucket up and pull straight out.
To Install:
•Slide bucket in and down until firmly seated in the door liner.
Full-width Door Shelf
To Remove:
• Slide shelf up and pull straight out.
To Install:
• Reverse above procedure.
Storage Drawers
Snack Drawer (select models)
The Snack Drawer can be used for storage of miscellaneous items or extra produce.
To Remove:
•Pull drawer out to full extension. Tilt up front of drawer and pull straight out.
To Install:
•Insert drawer into frame rails and push back into place.
Beverage Chiller™
(select models)
The Beverage Chiller™ keeps
beverages and other items cooler than the rest of the fresh food
section. A cold air inlet allows air from the freezer section to pass into the beverage chiller.
The Beverage Chiller™ control is located
on the left wall of the fresh food compartment. The control adjusts the amount of cold air allowed in to the beverage chiller. For a cooler temperature
in the Beverage Chiller™ slide the control down.
To Remove:
• First remove the pick off shelf to the left of the Beverage Chiller™.
• Firmly hold each side of beverage chiller, lift up and away from door liner.
To Install:
• Reverse above procedure.
10
