10.Using pliers, tighten the coupling with an additional
If the dryer is not level, prop up the dryer using a wood block. Use a wrench to adjust the legs up or down and check again for levelness.
NOTE: Do not overtighten. Damage to the coupling can result.
11.Check that the water faucets are on.
12.Check for leaks around “Y” connector, faucet and hoses.
Level Dryer
Check the levelness of the dryer by first placing a level on the top of the dryer near the console.
Then, by placing a level in the crease on the side of the dryer between the top of the dryer and the dryer cabinet, check the levelness from front to back.
Reverse Door Swing
You can change your door swing from a
1.Place a towel or soft cloth on top of the dryer or work space to protect the surface.
Remove the door assembly
1.Open the dryer door.
2.Remove the bottom screw from each of the 2 hinges that attach the dryer door to the front panel of the dryer.
3.Loosen the top screw from each of the 2 hinges in Step 2.
A
B
A
B
A. Loosen these screws.
B. Remove these screws.
4.Remove the dryer door and the hinges by lifting upward on the door. Lay the door on a flat, protected surface, with the inside of the door facing up. Remove remaining 2 loose screws from dryer front panel.
18
