WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1 Power supply cord—Plug into a grounded 3 prong outlet

Plug into a grounded 3 prong outlet. Check that power supply cord does not touch dishwasher motor or lower part of dishwasher tub.

Reconnect Power

1 Reconnect power

Reconnect electrical power at the fuse box or circuit breaker box.

Check Operation

❏Read the Dishwasher User Instructions that came with your dishwasher.

❏Check that all parts have been installed and no steps were skipped. Check that you have all tools used.

❏Start dishwasher and allow it to complete the shortest wash cycle. After the first 2 minutes unlatch door, wait 5 seconds, then open door. Check that there is water in the bottom of the dishwasher tub. Check that dishwasher is working properly.

If the dishwasher is not working properly, disconnect power or unplug dishwasher and see “If Dishwasher Does Not Operate” section.

If Dishwasher Does Not Operate

First try the solutions suggested here to possibly avoid the cost of a service call.

•Has the circuit breaker tripped or the house fuse blown?

•Is the door closed tightly and latched?

•Has the cycle been set correctly to start the dishwasher?

•Is the water turned on?

If none of these solve the problem, call 1-800-688-9900, or in Canada, call 1-800-807-6777.

Additional Tips

Expect longer wash times. Your new dishwasher will average 2 to 3 hours per load, but use nearly 40% less energy than older models. Designed with a low wattage, low energy consumption motor, your dishwasher washes longer to ensure exceptional cleaning. Certain models are equipped with an optical water sensor so the first cycle will run longer to calibrate to optical sensor. Selecting certain options could increase cycle time past 3.5 hours.

Rinse Aid is necessary for good drying results:

This dishwasher is designed to be used with rinse aid for good drying performance and controlling hard water deposit buildup. Energy efficient dishwashers use less water and energy so they depend on the water sheeting action of rinse aid for good drying performance.

Start/Resume light may flash:

When pressing Start/Resume, you must make sure the door is closed within 3 seconds. If you do not close the door, the Start/Resume light will flash until you press it again. (You must also do this when adding a dish during the middle of a cycle.)

21

Page 20 Page 22
Page 21
Image 21
Maytag W10199707A Check Operation, If Dishwasher Does Not Operate, Additional Tips, Reconnect power
Page 20 Page 22

W10199707A specifications

The Maytag W10199707A is a remarkable replacement water filter designed to enhance the performance of various refrigerator models. As a vital component for ensuring clean and safe drinking water, this filter is engineered with several key features and technologies that set it apart in the market.

One of the standout characteristics of the Maytag W10199707A is its advanced filtration technology. This product is designed to reduce contaminants, such as chlorine taste and odor, lead, and other harmful chemicals. This provides not only better-tasting water but also peace of mind for consumers looking for a reliable filtration option. The filter utilizes activated carbon to absorb impurities effectively, making it a crucial addition to any modern refrigerator system.

Installation and maintenance are made simple with the Maytag W10199707A. The filter is designed for easy replacement, typically requiring no tools for installation. Users can quickly swap out the old filter with a new one, ensuring that their water remains fresh and clean without unnecessary hassle. Additionally, the filter has a lifespan of about six months, depending on usage, which allows for convenient long-term operation without frequent changes.

Another significant feature of the Maytag W10199707A is its compatibility with various refrigerator models from leading brands. This versatility ensures that many consumers can benefit from this filter, regardless of their refrigerator brand, making it a popular choice for families and households.

Durability and reliability are fundamental principles behind the design of the Maytag W10199707A. Built to withstand daily use, the filter maintains optimal performance well throughout its lifespan. Each filter is rigorously tested to meet high-quality standards, ensuring it effectively meets consumer needs for safe and clean drinking water.

In conclusion, the Maytag W10199707A water filter stands out due to its advanced filtration technology, ease of installation, and compatibility with numerous refrigerator models. For anyone seeking to enhance their home’s water quality, this filter represents a reliable and efficient option that prioritizes health and convenience. Investing in this water filter is a smart choice for ensuring a consistent supply of refreshing and safe drinking water.
Top Page Image Contents