Route Water Supply Line and Drain Hose

1. Connect water supply line to water valve on dishwasher.

Option 1: Right-hand side utility access

 

For right-hand routing, place the water supply line in the

 

clips.

2. Slide clamp onto drain hose, and then push hose into “Y” connector until fully seated. Several clicks will be heard.

Route drain hose on clips on bottom/back of unit.

3. Slide clamp into position over the “Y” connector.

Option 2: Left-hand side utility access

 

 

For left-hand routing, place hose in clip on bottom right-

 

hand side of the dishwasher.

10

Page 10
Image 10
Maytag W10300218A installation instructions Route Water Supply Line and Drain Hose, Option 1 Right-hand side utility access