Complete Installation
1.Pull top drawer slide rails out and set top drawer on slide rails.
2 
2 
1
1
2.Pull slide rails forward until they snap into position.
3.Push top drawer in and repeat above steps for bottom drawer.
4.In the cabinet under the sink, coil excess drain hose and wrap with a zip tie.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
FF | ON |
O |
|
6.Select the Rinse Only cycle and press START/RESUME. Allow the dishwasher to fill, rinse and drain. Check for leaks. If leaks are found, secure the connection and repeat this step.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the User Instructions or contact the dealer from whom you purchased your dishwasher.
5.Plug in dishwasher or reconnect the power.
16
