Wayne-Dalton 9800 Series installation instructions Package Contents, Pre-Installation

Package Contents	NOTE: Depending on the door model, some parts listed will not be supplied if not
	necessary. rear supports may or may not be included with your door.

		DOOR SectionS (as required)
(1) operator bracket		(1)TorqueMaster® Spring Tube
		(2) Horizontal Track RH/LH
(2) Fully Adjustable RH/LH	(2) Quick Install RH/LH
Flagangle (as required)	Flagangle (as required)

	(2) Horizontal Angle		weather seal & nails	Door stop & nails
		right and left cable	(if included)	(if included)
idrive® Operator	(80” or 94”)
(sold seperately)	(as required)	drum assemblies

		f.a. Jamb Brackets	(2) Top Bracket Slide
right & left	Q.I. Jamb Brackets	(As Required)		(2) Top Bracket Base	(2) Vertical
Drum Wraps	(As Required)				Track RH/LH

right & left	36 Tooth Worm Gear	Counter Covers	Counter Gear	Rollers	(1) Center Bracket
End Brackets	(as required)	(as required)	(as required)	(as required)	assembly

lubricating oil	pull rope &	(1) Loose Winding Shaft	1/4”- 20 Flanged Hex
	screw eye
		(SINGLE SPRING only)	Nuts (as required)
(as required)	(if included)

(2) 3/8”- 16 Hex Nuts	5/16” x 1 5/8” Hex Head Lag	(2) 3/8”-16 x 3/4”	1/4” - 20 x 9/16” track
	Screws (as required)	Truss Head Bolts	bolts

(4) 1/4”-20 x 9/16” large	(4) 1/4”-20 x 5/8”	1/4”-14 x 5/8” Self Tapping	(2) #10 Phillips	1/4”-20 x 7/8” Self Drilling
head ribbed track bolts	Carriage Bolts	Screws (as required)	head screws	Screws (as required)

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local 3 yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

PRE-INSTALLATION