Wayne-Dalton 9800 Series Counter Installation, Securing Center Bracket Assembly

22

Tools Needed:

None

Counter Installation

Install the right side counter gear, with the missing tooth toward the outside and away from the end bracket. Press the counter gear onto the end bracket until snaps engage.

Select the right hand counter cover and align the hex of the counter cam with the end of the winding shaft. Also, align the “0” on the counter cover with the raised rib on the end bracket. Press the counter cover against the counter gear until it locks into place.

Repeat for left hand side for double spring applications.

NOTE: No drive gear, counter gear or counter cover is required on left hand side for single spring applications. Only an end bracket is needed.

IMPORTANT: At this time do not wind Counterbalance Springs!

Winding

Shaft Inside

End Bracket

Counter

Gear Missing

Tooth

Counter

Cover

Raised Rib

“0”

Hex of the

Counter Cam

INSTALLATION

23	Securing Center Bracket
	Assembly	CENTER
Tools Needed:	NOTE: If you are installing the idrive®	BRACKET
	opener on your garage door, skip this step	ASSEMBLY
	and continue with Step 24.
	NOTE: If you are installing a Doormaster™
	opener, see optional Doormaster™ Bracket
	installations on page 35, Figure B.
	NOTE: If you are not installing the
	idrive® opener on your garage door, you
	must install the center bracket bushing
	assembly. Follow these instructions for
	non-idrive®operated garage doors.

IMPORTANT: TorqueMaster® spring tube must be level after center bracket assembly is mounted to header.

To locate the center bracket, mark the
header halfway between the flagangles
and level the TorqueMaster® spring tube.
Drill 1/8” pilot holes into header for the lag
screws. Fasten the metal bracket to the
header using (2) 5/16” x 1-5/8” lag	(2) 5/16” x 1-5/8”
screws.	hex head lag
	screws

NOTE: Upon completion of this step, con- tinue with step 28.

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local 27 yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com