4
Assembly instructions
F
To Remove Debris Bag From Product (F)
1. Gently press bag latch (F1) down. See fig F.
2. Lower handle of bag frame away from product.
3. Move bag frame forward.
1
Fitting the Handle Bolt (G)
1.Place handle bolt into the location slot on the product and slide into place.(G).
2.Repeat on the other side.
Fitting the Handle (H)
1.Locate handle onto handle bolts on each side of the product.
2.Secure handle by turning handle knobs clock- wise. (H)
3.The handle can be adjusted by turning handle knobs 3 full turns
G |
H |
Fitting The Shoulder Harness (J) & (K).
1.Thread strap through the slots in the handle.(J)
2.Thread strap through the buckle. See fig J.
Adjust as required to ensure the shoulder har- ness is in the most comfortable position. See fig. K.
J
Buckle
K