Assembling Your Canister Steam 
System
STEAM CLEANING ACCESSORIES
WARNING: Do not connect accessories while unit is emitting steam.
JET NOZZLE / SCRAPER / TRIANGLE BRUSH
1.Select one of the three accessories (Jet Nozzle shown as example) and push onto the Steam Nozzle (A).
2.Rotate accessory until the yellow lock/release button snaps into the accessory hole (B).
NOTE: The Jet Nozzle, Scraper and Triangle Brush can be connected to the end of an Extension Wand for reaching high or difficult spots. Connect the Extension Wand (or Wands) as outlined on Page 8, then connect your desired accessory to the Wand in the same way as you would normally connect to the Steam Nozzle.
B
A
Steam Nozzle
UTILITY BRUSHES / ANGLED NOZZLE / SCRUB PAD
NOTE: Accessories connect to the Jet Nozzle, not the Main Nozzle.
1.Firmly press accessories onto tip of Jet Nozzle. Press it on as far as possible to prevent steam leakage.
2.To remove accessories, simply grip it firmly and pull it off Jet Nozzle.
10 ENGLISH
